Display-devices AvStack Projector Stackers Manual do Utilizador descarregar pdf (Página 1)

1 5/26/05

5880 Sheridan Blvd., Arvada, CO 80003 - 303/412-0399 - [email protected]

Whether you are mounting this system in a facility with sheetrock or drop-tile style ceiling, you must attach to overhead

structural points that are capable of holding at least four times

the combined weight of the AVStack and Projector. This

is a minimum requirement. Follow any local or state codes that apply to your specific area.

1. Begin by determining the exact mounting position of the AVStack frame. Span structural beams with a structural

channel if points are not located precisely above (4) mounting points.

2. Use 3/8” threaded rod to attach to the (4) mounting points on the AVStack. These points are located towards the

corners of the frame. Be sure to use split lock washers, flat washers and upper and lower nuts. If mounting to truss,

use properly-rated c-clamps or cheeseboroughs. The mounting hardware can attach to the slots to canter on an

angle.

Top View

Ceiling Mount Point

Installation Instructions

AVStack Mini for Christie Projectors

5880 Sheridan Blvd.

Arvada, CO 80003

303-412-0399

YAW Adjustment

Pitch and height

ustment

Pitch and height

Adjustment

Tilt and height

Adjustment

Ceiling Mount Point

1 2

1 5/26/05 5880 Sheridan Blvd., Arvada, CO 80003 - 303/412-0399 - [email protected] Whether you are mounting this system in a f

2 5/26/05 5880 Sheridan Blvd., Arvada, CO 80003 - 303/412-0399 - [email protected] 3. Place the projector onto the mounting pa

Sem comentários

Display-devices AvStack Projector Stackers Manual do Utilizador Página 1